Home Blood Pressure Test

Skip to the navigation

Test Overview

A home blood pressure test allows you to keep track of your blood pressure at home. Blood pressure is a measure of the force of blood inside an artery.

Most people use an automatic device to measure blood pressure at home. This device works by inflating a cuff around the upper arm to temporarily stop the flow of blood in an artery. As air is slowly released from the cuff, the device records the pressure at which blood begins to flow again.

Blood pressure is recorded as two measurements.

  • The first number is the systolic pressure. Systolic pressure represents the peak blood pressure that occurs when the heart contracts.
  • The second number is the diastolic pressure. Diastolic pressure represents the lowest blood pressure that occurs when the heart relaxes between beats.

These two pressures are expressed in millimeters of mercury (mm Hg) because the original devices that measured blood pressure used a column of mercury. Blood pressure measurements are recorded as systolic/diastolic (say "systolic over diastolic"). For example, if your systolic pressure is 120 mm Hg and your diastolic pressure is 80 mm Hg, your blood pressure is recorded as 120/80 (say "120 over 80").

Automatic blood pressure monitors

Automatic monitors, also called electronic or digital monitors, are battery-operated monitors that use a microphone to detect blood pulsing in the artery. The cuff, which is wrapped around your upper arm, automatically inflates and deflates when you press the start button.

The type of blood pressure monitor typically found in supermarkets, pharmacies, and shopping malls is an automatic device.

Blood pressure monitors that measure your blood pressure in your finger or your wrist are not usually accurate and are not recommended.

Manual blood pressure monitors

Manual models are similar to those that your doctor might use to take your blood pressure. Called a sphygmomanometer, these devices usually include an arm cuff, a squeeze bulb to inflate the cuff, a stethoscope or microphone, and a gauge to measure the blood pressure.

A blood pressure measurement is taken by temporarily stopping the flow of blood in an artery (usually by inflating a cuff around the upper arm) and placing the stethoscope on the skin over the artery. You listen for the sound of the blood beginning to flow through the artery again as air is released from the cuff.

Blood pressure is displayed on a circular dial with a needle. As the pressure in the cuff rises, the needle moves clockwise on the dial. As the cuff pressure falls, the needle moves counterclockwise. As the cuff pressure falls, the reading on the gauge when blood flow is first heard is the systolic pressure. The reading on the gauge when blood flow can no longer be heard is the diastolic pressure.

Ambulatory blood pressure monitors

An ambulatory blood pressure monitor is a small device that is worn throughout the day, usually for 24 or 48 hours. The device takes your blood pressure automatically.

Your doctor might recommend this monitor if he or she thinks you have white-coat (or office) hypertension or if other methods do not give consistent results.

Health Tools 

Health Tools help you make wise health decisions or take action to improve your health.

Actionsets help people take an active role in managing a health condition. Actionsets are designed to help people take an active role in managing a health condition.

Why It Is Done

Home blood pressure monitoring measures your blood pressure at different times and in different places (such as at home and at work) during the day. It may be done to:

  • Find out if you have high blood pressure.
  • Keep track of how well medicine taken to reduce blood pressure is working.
  • Check how lifestyle changes, such as weight loss and exercise, are affecting blood pressure. Home monitoring can help people feel more involved in and more in control of their own health care.
  • Watch for changes in blood pressure that may be side effects of medicines.
  • Check for problems with high blood pressure during pregnancy or with preeclampsia. To learn more, see the topic Preeclampsia and High Blood Pressure During Pregnancy.

Ambulatory blood pressure monitoring is often used if there is a big difference between the blood pressure readings you get at home and your readings in your doctor's office.

How To Prepare

Before you take your blood pressure

  • Don't eat, smoke, or exercise for at least 30 minutes before you take your blood pressure. And don't use any medicines that can raise blood pressure, such as certain nasal sprays.
  • Rest at least 5 minutes before you take a reading. Sit in a comfortable, relaxed position with both feet on the floor.
  • Don't move or talk while you are measuring your blood pressure.
  • Try not to take your blood pressure if you are nervous or upset.
  • If you can, use the same arm for every reading. Readings may be 10 to 20 mm Hg different between your right arm and your left arm.

Remember that blood pressure readings vary throughout the day. They usually are highest in the morning after you wake up and move around. They decrease throughout the day and are lowest in the evening.

Ambulatory blood pressure monitoring

If you have an ambulatory blood pressure monitor, you do not need to do anything to prepare. The monitor will automatically take your blood pressure while you do your normal daily activities.

How It Is Done

Click here to view an Actionset. High Blood Pressure: Checking Your Blood Pressure at Home

Buying and maintaining a monitor

When you buy a blood pressure monitor, be sure to buy the correct size. The size of the blood pressure cuff and where you place the cuff on your arm can change your blood pressure readings. If the cuff is too small or too large, the measurements will not be accurate. Hospital and medical supply stores generally carry many cuff sizes and can help make sure that your cuff fits you.

Take your new monitor to your doctor's office to make sure it is working right. Have your health professional take your blood pressure and then compare that result with your own device. Ask your health professional to watch you use your monitor to make sure that you are using it correctly. It is a good idea to have your monitor checked every year.

Check your blood pressure cuff frequently to see that the rubber tubing, bulb, valves, and cuff are in good condition. Even a small hole or crack in the tubing can lead to inaccurate results.

Taking your blood pressure

Your blood pressure in your right arm may be higher or lower than the blood pressure in your left arm. For this reason, try to use the same arm for every reading.

Ask your doctor if you should take your blood pressure at the same time of day each time you take it, or if you should take your blood pressure at different times of the day. Blood pressure readings rise and fall at different times during the day. They are usually highest in the morning and lowest in the evening.

At first it is a good idea to take your blood pressure 3 times in a row, 5 or 10 minutes apart. As you get more comfortable taking your own blood pressure, you will only need to measure it once or twice each time.

Ask your doctor how often you should take your blood pressure. Your doctor may ask you to check your blood pressure more often if your blood pressure is not well-controlled or if you are taking different medicines or changing doses of a medicine.1

The instructions for using blood pressure monitors vary depending upon the type of blood pressure monitor you choose. Here are some general guidelines:

  • Take your blood pressure while you feel comfortable and relaxed. Sit quietly for at least 5 minutes with both feet on the floor. Try not to move or talk while you are measuring your blood pressure.
  • Sit with your arm slightly bent and resting comfortably on a table so that your upper arm is on the same level as your heart.
  • Place the blood pressure cuff on the skin of your upper arm. You may have to roll up your sleeve, remove your arm from the sleeve, or take your shirt off.
  • Wrap the blood pressure cuff snugly around your upper arm so that the lower edge of the cuff is about 1 in. (2.5 cm) above the bend of your elbow.

Keeping a blood pressure diary

Record your blood pressure numbers with the date and time. You might use a log book or a spreadsheet on your computer. Your monitor might have a feature that will record your numbers for you. Some monitors can transfer this information to your computer.

Also record your daily activities, such as the time you take medicine or if you feel upset or feel stressed. Your records may help explain changes in your blood pressure readings and help your doctor adjust your medicines.

Automatic blood pressure monitors

Follow the instructions for your monitor. When you press the start button, the cuff will inflate automatically. The cuff will then deflate and the numbers on the screen will begin to drop. When the measurement is complete, your monitor displays your blood pressure and pulse rate.

Manual blood pressure monitors

A large artery (called the brachial artery) is located slightly above the inside of your elbow. You can check its location by feeling for a pulse in the artery with the fingers of your other hand.

If you are using a stethoscope, place the earpieces in your ears and the bell of the stethoscope over the artery, just below the cuff. The stethoscope should not rub on the cuff or your clothing, since this may cause noises that can make your pulse hard to hear. If you are using a cuff with a built-in stethoscope bell, be sure the part of the cuff with the stethoscope is positioned just over the artery. The accuracy of a blood pressure recording depends on the correct positioning of the stethoscope over the artery. You may want to have another person who can use a stethoscope properly help you take your blood pressure.

Close the valve on the rubber inflating bulb. Squeeze the bulb rapidly with your opposite hand to inflate the cuff until the dial or column of mercury reads about 30 mm Hg higher than your usual systolic pressure. (If you don't know your usual pressure, inflate the cuff to 210 mm Hg or until the pulse at your wrist disappears.) The pressure in the cuff will stop all blood flow within the artery temporarily.

Now open the pressure valve just slightly by twisting or pressing the valve on the bulb. The pressure should fall slowly at about 2 to 3 mm Hg per second. Some blood pressure devices have a valve that automatically controls this rate. As you watch the pressure slowly fall, note the level on the dial at which you first start to hear a pulsing or tapping sound through the stethoscope. The sound is caused by the blood starting to move through the closed artery. This is your systolic blood pressure. If you have trouble hearing the start of your pulse through the stethoscope, you can check your systolic blood pressure by noting the level on the dial when you are able to feel the pulse at your wrist once again.

Continue letting the air out slowly. The sounds will become muffled and will finally disappear. Note the pressure when the sounds completely disappear. This is your diastolic blood pressure. Finally, let out all the remaining air to relieve the pressure on your arm.

How It Feels

You may feel some discomfort when the blood pressure cuff inflates, squeezing your arm.


There are no risks or complications from this test.


Blood pressure for adults age 18 and older (mm Hg) 2


119 or below


79 or below



120 to 139


80 to 89



140 or above


90 or above

In general, the lower your blood pressure, the better. For example, a blood pressure reading of less than 90/60 is healthy as long as you feel okay. But if you have low blood pressure and feel lightheaded, faint, or like you may vomit, talk to your doctor.

What Affects the Test

Blood pressure normally goes up and down from day to day and even from moment to moment. Blood pressure tends to be higher in the morning and lower at night. Stress, smoking, eating, exercise, cold, pain, noise, medicines, and even talking can affect it. A single high reading does not mean you have high blood pressure, and a single normal reading does not necessarily mean you do not have high blood pressure. The average of several repeated measurements throughout the day is more accurate than a single reading.

Your blood pressure may only be high when you go to your doctor's office. This is called white-coat (or office) hypertension and may be caused by stress about seeing your doctor. When you regularly check your blood pressure at home, you may find that your blood pressure is lower when you are not at the doctor's office.

What To Think About

Do not adjust your blood pressure medicines based on home blood pressure readings unless your doctor tells you to.

Other Places To Get Help


NIH: National Heart, Lung, and Blood Institute (U.S.)
(240) 629-3255
American Heart Association (AHA)

Related Information



  1. Pickering TG, et al. (2008). Call to action on use and reimbursement for home blood pressure monitoring. A joint scientific statement from the American Heart Association, American Society of Hypertension, and Preventive Cardiovascular Nurses Association. Hypertension, 52(1): 10–29.
  2. Weber MA, et al. (2013). Clinical practice guidelines for the management of hypertension in the community. Journal of Clinical Hypertension. DOI: 10.1111/jch.12237. Accessed December 19, 2013.

Other Works Consulted

  • American Heart Association. (2005). Recommendations for blood pressure measurement in humans and experimental animals. Part 1: Blood pressure measurement in humans. AHA Scientific Statement. Hypertension, 45(1): 142–161.
  • Pickering TG, et al. (2008). Call to action on use and reimbursement for home blood pressure monitoring. A joint scientific statement from the American Heart Association, American Society of Hypertension, and Preventive Cardiovascular Nurses Association. Hypertension, 52(1): 10–29.


ByHealthwise Staff
Primary Medical Reviewer E. Gregory Thompson, MD - Internal Medicine
Specialist Medical Reviewer Stephen Fort, MD, MRCP, FRCPC - Interventional Cardiology

Current as ofMarch 12, 2014